Aug 26, 2003 #1 prostocktom Mechanical May 18, 2002 13 ANY ONE OUT THERE MACHINING THIS ALLOY. LOOKING AT MAKING SOME PARTS FROM IT. WAS WONDERING ABOUT IT.
ANY ONE OUT THERE MACHINING THIS ALLOY. LOOKING AT MAKING SOME PARTS FROM IT. WAS WONDERING ABOUT IT.
Aug 27, 2003 #2 TVP Materials Apr 12, 2002 4,592 I am not actively involved in machining Mg, but I recommend reviewing the following brochure from Hydro Magnesium on the subject: http://www.hydromagnesium.com/HITS/OSL02201.NSF/Files/PDF brochures/$file/Machining-23107-Eng.pdf Upvote 0 Downvote
I am not actively involved in machining Mg, but I recommend reviewing the following brochure from Hydro Magnesium on the subject: http://www.hydromagnesium.com/HITS/OSL02201.NSF/Files/PDF brochures/$file/Machining-23107-Eng.pdf
Aug 29, 2003 #3 YYS Automotive Nov 4, 2002 15 Be careful with the chips when you do machineing. Clean the machine as offen as you can and put them in a designated container. This is to prevent any risk of fire. Upvote 0 Downvote
Be careful with the chips when you do machineing. Clean the machine as offen as you can and put them in a designated container. This is to prevent any risk of fire.
