Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Toggle bolts

Status
Not open for further replies.

csd72

Structural
May 4, 2006
4,574
Does anyone have any information on the capacity of toggle bolts (i.e. the ones with spring loaded wings at the end)?

 
Replies continue below

Recommended for you

Check w/ the mfg.. But I think the dry wall will pull out before they fail. If memory serves - they are rated in the 50-75 lb range for 1/2'' drywall.
 
Thanks mike,

I am using it to tie back a sign to a stone facade, it will be much stronger than dry-wall.

csd
 
I would'nt use those for anything other than trival home use attachments.
Over time the small pivots will rust off and they will pull right out. You need to use some sort of a structural anchor that will fix to the actual building structure.
 
Thanks Screwman,

I didnt want to use them, and this is exactly the type of reason that I wanted.

I didnt think of that but it makes sense about the pivots.

csd
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor