Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Temporary fence for falling debris 1

Status
Not open for further replies.

larsacious

Structural
Jan 9, 2010
122
I have a situation where a 100 year old building has a brick facade which has severely deteriorated and is imminently hazardous. I need to provide a repair plan to the city. In the interim I would like to recommend a temporary fence to restrict access. Is anyone aware of how car the fence should be offset from the building? The building is 90 feet tall and my concern is that debris from the top floor could land on the public side of the fence.
 
Replies continue below

Recommended for you

No answer, but some questions: Are there any projections in the walls, perhaps window sills, or trees which would cause falling objects to be diverted out. Also, what is on the ground to possibly cause bounced objects to be directed out.

Any sidewalks beyond possibly requiring a temporary roof protection to pedestrians.
 
We will put a protective canopy where is a sidewalk exists. There are really no projections from the building before debris to ricochet off of. The building is triangular shaped. There is an alley on one side a parking lot on another in the city street on the other. There is a extremely low volume of pedestrian traffic in the vicinity of the building.
 
Unfortunately low volume is not no volume... FYI: We have had a recent spat of bricks falling off a building and used two layers of 19.7mm plywood, which showed itself able to withstand the hit in an on-site test the owner insisted upon.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor