Enoz28
Electrical
- Apr 13, 2010
- 6
I've been told there is a Parasitic Draw/Drain specification vehicle manufacturers use. All vehicles draw some power from the batteries when the car is shut off, Parasitic draw/drain is used to describe this. I've scoured the SAE handbook(maybe I overlooked it) and have been told to look at an ASE manual(don't have access to one, but trying to get access). I've found ways to test for Parasitic draw, and a lot of supposed specs from different manufacturers, but I can't find any thing other than suggested values. My question is: Is there a spec that outlines Parasitic Draw/Drain that manufacturers design to, and/or utilize for error detection?