...and in the section of the dialog labeled 'Grid Settings' you'll find the 'Snap to Grid' option. Note that this will only affect new parts created from scratch.
If you have an existing template file(s) you'll need to open the master part file(s) and while in the sketch task, go to...
Preferences -> Grid...
...and toggle ON the 'Snap to Grid' option there. Then leave the Sketcher, delete the 'dummy' sketch which was just created and then save the part file.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA Siemens PLM: UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
