Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

MDE and LOS

Status
Not open for further replies.

killswitchengage

Geotechnical
Jan 5, 2015
364
Hi
Should Micro Deval and Los Angeles tests results must be close to each other to be valid or not ?
 
Replies continue below

Recommended for you

the results will not be close to each other.
if it passes MDE (which is conservative) than why bother with another test?

if you are going to run a secondary test, than it might be better to do a mag. sulfate test instead of LA Abrasion. See table 4 and conclusions of the referenced paper


2j1a77r.jpg

 
Very much appreciated , you see we are used to getting very close results between LA and MDE and we conduct them both for every aggregate used for concrete and pavements its systematic. Sure LA suffice in its own especially for concrete design , but this is the way we do it .
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor