Looking for a V spray injector

[YAMAMAN]

I'm looking for a V spray injector to be used in a dual intake valve motor. Need it rated 364cc/min at 3 bar with a total height arround 2 inches. This is for an alcohol conversion 600 cc motor. Whoever converted it used a pencil spray style injector in their conversion. I believe it would work better with a V spray to spray toward both valves. This is a ported injection system. Am I looking at this correctly? Open to any suggestions. Thanks in advance.

 

[TStaples]

Yamaman,

Check the following threads for background info:

http://www.eng-tips.com/viewthread.cfm?qid=175207&page=2

http://www.eng-tips.com/viewthread.cfm?qid=173522&page=3.

RC Engineering would be a good place to start. If one is available, they should be able to get it.

http://www.rceng.com

-Tony Staples

http://www.tscombustion.com

 

[EfiOz]

Magneti Marelli also make twin spray "Pico" style injectors that have stainless steel bodies.