Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to change freq to cycle/min in results?

Status
Not open for further replies.
Allen110

Allen110

Mechanical
Feb 22, 2002
4
Greetings all.
After a nodal or free vibration analysis you know that the frequency is shown as HZ, how can I make ANSYS to show the frequency like cycle/min or cycle/second ?
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Allen

You can label plot with a title having just about anything you want............limited to field length.

/title,.............
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

H
  • Locked
  • Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
M
  • Locked
  • Question
ANSYS Mechanical Scripting: how to delete an existing heatflux?
Replies
0
Views
674
MihailW
M
X
  • Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
946
xinyu3liu
X
IJR
  • Locked
  • Question
On how and where to insert command snippets inside Workbench mechanical
Replies
2
Views
1K
IJR
IJR
andradesilva
  • Locked
  • Question
modal analysis in ANSYS Mechanical APDL 2020 R2: How to see graphical results without mesh/elements
Replies
1
Views
733
NRP99
NRP99

Part and Inventory Search

Sponsor

Back
Top Bottom