Henrysayen
Mechanical
- May 26, 2016
- 5
Hi,
I am designing a tank and they give me the following data:
IBC 2009 and ASCE7-05, Ss = 1.20 g; S 1 = 0.50 g, EI = 1.25,
Occupation category III, site class D.
The multiplication factor of 1.8 should be applied above the resulting force for the equipment, structures, foundations and anchorage.
I want to know, using the COMPRESS as input value 1.8 required?
I am designing a tank and they give me the following data:
IBC 2009 and ASCE7-05, Ss = 1.20 g; S 1 = 0.50 g, EI = 1.25,
Occupation category III, site class D.
The multiplication factor of 1.8 should be applied above the resulting force for the equipment, structures, foundations and anchorage.
I want to know, using the COMPRESS as input value 1.8 required?