Help

[Mpino]

Can do convert from velocity vibration to aceleration vibration, directly or by a factor or procedure. I need to specify vibration values in acceleration, but references are in velocity terms.


Thanks.

 

[ronfrend]

To convert from velocity to acceleration you need to differentiate (ooposite to integrate) the velocity value at a specific frequency.

For the calcs on how to do this check out this old post (March 2002) from eng-tips:

http://www.eng-tips.com/gviewthread.cfm/lev2/16/lev3/58/pid/384/qid/16752/auid/11377

Good luck

Ron Frend

 

[GregLocock]

And bear in mind that you cannot convert an rms velocity into an acceleration signal unless you know the frequency content.

Cheers

Greg Locock