Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

GeoFoam as a structural fill 1

Status
Not open for further replies.

yakpol

Structural
Jun 1, 2001
450
Hi, folks!
We are trying to use GeoFoam as a structural fill for the railroad. The vertical and longitudinal forces are very high, special worries are about shear transfer between layers o geofoam blocks. The force is about 40 lb/sft. If anybody has an experience in it or knows where to look? Please, help!

Yakov
 
Replies continue below

Recommended for you

Yakov -

Were you ever able to find any information on this material? I am looking into using it for fill in an abutment for an elevated roadway, but need to learn more about it. My primary concern is how it acts in a seismic event. What sort of lateral loads would we expect to see from the foam blocks on the abutment wall?

TSM
 
TSM, I found some mechanical properties of Geofoam EPS products like modulus elasticity and poisson ratio, so you can calculate lateral stiffness of the fill and calculate the displacements. I could fax you the sheet with the properties if you wish.

Yakov
 
contact Dawit Negussey at Syracuse University at the Geofoam R
esearch Institute.
 
This and similar material has been used for a long time as structural fill, particularly over incompetent materials. Using the EPS in conjunction with lightweight insulating cellular concrete fill will increase mechanical properties to cover about any condition a soil mixture could withstand, at significantly lower unit weight.

Check out or
Both have geotechnical applications for cellular concrete.
 
Is your application limited to GeoFoam (EPS) or can you use Lightweight Foam Concrete. If you can use lightweight foam concrete I have some information that may be useful regarding the transfer of lateral forces between lifts of this material.
rjakiel@kersur.net
 
you can also check out ajvoton.com for information on lightweight foam concrete
 
Rjakiel,
Thanks for suggestion. We, actually, used lightweight concrete (Elastizell, 30pcf) on the other project. Foam concrete is more expensive than geofoam and the project I described is about 3000 feet long.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor