Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

FEA: Crash Analysis

Status
Not open for further replies.
DDM84

DDM84

Automotive
Oct 13, 2011
16
Hello Friends,

I am performing crash analysis for vehicle barrier in LS Dyna.

I was wondering how to determine time step size for mass scale solution (DT2MS) ?

Thanks in advance
 
Status
Not open for further replies.

Similar threads

M
  • Question
FEA Adhesive Modeling
Replies
3
Views
5K
milio000
M
Stress_Eng
  • Question
FEM Contact Analysis Variables
Replies
17
Views
12K
Stress_Eng
Stress_Eng
EdwardNigma
  • Question
Mastering FEA: How to Get Through Stage 2 (Developing Good Modeling Techniques)?
Replies
7
Views
4K
rb1957
rb1957
uzi210
  • Locked
  • Question
FEA results verification
Replies
8
Views
1K
Stress_Eng
Stress_Eng
T
Thermal load with thermal gradient in a structure analysis with FEM
Replies
1
Views
158
SWComposites
SWComposites

Part and Inventory Search

Sponsor

Back
Top Bottom