Ethernet/485 Interface 2

[SWT330]

Before I meet with my design consultant about adding ethernet to our temperature control I'd like to do a little research myself. We manufacture a temperature control that has a 485 bus. I am hoping to design a tiny proprietary ethernet interface that will connect to our 485. Can you recommend a supplier for the ethernet connection components? I have seen similar devices that are barely larger than the RJ45 connector but I do not remember who makes it.

 

[MacGyverS2000]

Are you talking about the physical connection components, or the control components?

Dan - Owner

http://www.Hi-TecDesigns.com

 

[ScottyUK]

Lantronix?


----------------------------------

If we learn from our mistakes I'm getting a great education!

 

[SWT330]

MacGyver, I would like to find a product that has the wire connection with the control components packaged so that all we have to do is add a microcontroller and a 485 transceiver.

 

[SWT330]

ScottyUK, thank you for the Lantronix reference. I have made an inquiry with them as it looks like they offer products we need.

 

[itsmoked]

There's also Netburner.

http://www.netburner.com/products/serial_to_ethernet/sbl2e.html

Keith Cress
kcress -

http://www.flaminsystems.com

 

[VEBill]

This is a very useful thread.

 

[zappedagain]

We've had good luck with the Gridconnect CG-NET485-01.

Z