Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Drafting Question on view created with "View Break"

Status
Not open for further replies.
Barnon

Barnon

Mechanical
Jul 23, 2016
97
I'm on version 1863. The Drawing below shows a couple of views created with "View Break" which by the way works VERY slick. However when I tried to create "Section View" to show whats shown in Detail D I was unable to edit the section line or the boundary of the view. Got a few propagation errors as well with some of the tries. I was able to get what I wanted with "Breakout Section Views" and "Detail View".

Just wondering if there's a setting to allow the use of "Section View" with a "View Break". I also tried a stand a alone "Section Line" with no success.

Thanks for any help.

s
Drawing_uq5uxi.jpg
 
Status
Not open for further replies.

Similar threads

H
  • Question
NXOpen Section view creation
Replies
6
Views
5K
Husky Dusky
H
CAD2015
  • Question
Detail View in drawing - Modifications 1
Replies
2
Views
2K
CAD2015
CAD2015
C
  • Question
Hide features in drawing view 1
Replies
5
Views
3K
Rob_N
Rob_N
W
  • Question
Determine Current Model View Angles
Replies
3
Views
2K
Toost
Toost
Asieros
  • Locked
  • Question
Siemens NX Drafting - Reset the "Border to Arrow Distance"
Replies
0
Views
623
Asieros
Asieros

Part and Inventory Search

Sponsor

Back
Top Bottom