Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Concentration of Propylene Glycol in cooling water 2

Status
Not open for further replies.

adavidi

Mechanical
Feb 14, 2001
40
Hi,
Does anyone used and measured automatically, the concentration of Propylene Glycol in cooling water system?
Right now I only have a portable device that gives the temperature of freezing, but I’d like to have an automatic controller of the concentration.

Thanks in advance
Aharon
 
Replies continue below

Recommended for you

Most of these cooling systems are closed systems so that there is no regular makeup of water. The systems are filled on a batch basis.
 
A refractor is what you need, commercially available fromm scientific instrument suppliers, a simple one will give % glycol, mono & prop glycol on same instrument.

mrushy

 
Mrushy,
Can you recommend on specific supplier/vendor for this instrument?

Aharon
 
Aharon

Bellinghamandstanley.com

They have a UK and US address, I have only purchased in the UK.

mrushy
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor