Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cleanliness of piles

Status
Not open for further replies.

KenCenaiko

Mechanical
Nov 5, 2007
2
What is the approved method to prepare a reinforced concrete pile for either a pile cap or grade beam?

The concrete piles in question have re-bar protruding from the pile cap, but I am concerned about the amount of residual soil remaining on top of the pile prior to pouring the cap. These piles will be supporting 40 ton cranes and my contractor does not seem concerned about the cleanliness of the pile "tops". Any advice? Are bonding agents typically applied to the top of the pile?
 
Replies continue below

Recommended for you

Bang exposed rebar once with 2 lb hammer. Then place concrete.
 
It's not going anywhere pour and it will be fine.
 
If you're really worried, blow it out with compressed air.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor