Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Bended foil as an Airfoil

Status
Not open for further replies.
JoseAero

JoseAero

New member
Oct 26, 2003
1
Can anybody help me with the shape (x,y) a piece of foil takes when bended over itself and hold in one end, I intend to use such symetrical airfoil for low Re drag reduction.

Thaks
 
Status
Not open for further replies.

Similar threads

stormloader
  • Question
Help Identifying Callouts in an Old Drawing 1
Replies
8
Views
9K
WKTaylor
WKTaylor
M
  • Question
how to calculate drag and lift coefficient at different airfoils of horizontal axis wind turbine blade
Replies
4
Views
5K
LiftDivergence
LiftDivergence
Franklin M.
  • Locked
  • Question
AS 9100
Replies
8
Views
436
Franklin M.
Franklin M.
Platypusimon
  • Locked
  • Question
MCI generation of an assembly, with different section cuts and phases
Replies
0
Views
235
Platypusimon
Platypusimon
MCA1983
  • Locked
  • Question
Why can't we use steel as wing instead of aluminum alloy 11
2
Replies
20
Views
865
WKTaylor
WKTaylor

Part and Inventory Search

Sponsor

Back
Top Bottom