Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Applying Passive Pressure to Walls in ETABS

Status
Not open for further replies.
Struct-007

Struct-007

Structural
Aug 7, 2020
32
Is there a way to apply passive soil pressure to the walls in ETABS?
This means that the passive pressure will be activated if the wall movement reaches a certain limit.
Thanks.
 
Status
Not open for further replies.

Similar threads

GJoeRMK
  • Question
Modeling question in etabs, What Etabs does to a shell element to make it "ribbed" ?
Replies
0
Views
2K
GJoeRMK
GJoeRMK
Tygra_1983
  • Question
Natural Frequencies in ETABS
Replies
5
Views
2K
GregLocock
GregLocock
Stockton2008
  • Locked
  • Question
How to model concrete slabs in Etabs
Replies
1
Views
2K
InnovatorX
InnovatorX
Stockton2008
  • Locked
  • Question
How to define ultimate and service load combos in Etabs
Replies
1
Views
1K
Luceid
Luceid
Stockton2008
  • Locked
  • Question
How to set displacement ratio (storey drift ratio) check in Etabs
Replies
0
Views
862
Stockton2008
Stockton2008

Part and Inventory Search

Sponsor

Back
Top Bottom