ALVENIUS PIPE SYSTEM

[NAITSABES]

Grettins to everybody.
I would like to know if someone of you can help me with a problem.
I have pipes of 28, 30 and 32 diameter inch , I need to connect this pieces of pipes with Alvenius System K-10, but I don't the mesurements of the coupling ring that goes around the counter od the pipe, which connect with the .
Alvenuis coupling

I will appreciate any information
John
Mechanical Engineer

 

[JohnBreen]

Hello John,

I hate to see a posting with zero responses so I "googled" and I came up with this Internet address for "leaflets" descriptive if the ALVENIUS K-10 product line.

I hope it helps or points you in the right direction.

Regards, John.

 

[STYMIEDPIPER]

JohnBreen
Was a web site to be listed in your post
I failed to see the web site that you had mentioned.
Hence, I located this one which may offer the information required by NAITSABES

http://www.alvenius.com

 

[JohnBreen]

Hi STYMIEDPIPER,

Yes, I thought that I had included that address but not until your posting did I see that the cyber-gremmlins had erased it on its way to eng-tips.

I found Alvenius via google and then got down to the product descriptions and "leaflets" at this address:

http://www.alvenius.com/article.php?id=22

OK, I looked twice this time and the address is really there. Thanks for your "heads-up"

Regards, John.

 

[unclesyd]

JohnBreen,

Ah! for a senior moment.

I had Googled and was about to post when your post appeared.