Search results for query: *

Wait is this illegal thermal treatment?

Wanted to if after roughing on the finishing cycle If a machinist is not use to work hardening materials , less than .010-.020 depth cut will work harden stain less. It will not cut correctly And will destroy the insert. Being there done that Rookie mistake.

I forgot yo add, components must have enough clearance for accessibility for hand tool. In other words clearance for access. Such as an impact wrench, torque wrenches. Ect

I would take up interesting issues like this. Couple of question Was there failure analysis met lab visual and tensile properties of the patent material of machinable vs problem parts. Sample hardness of castings. What type turning equipment How is the casting held. Is roughing and then...

What was the hardness of alloy steel? What process was used for cladding

Burunduk I concurr however , however the holes has to be measured as one attribute. Then the true position as an other attribute. Done this many times. Correct?

Why not your name and a numbers, like naming Such as similar to rex76, or M45.

I am just rookie with pipe flanges. But was researching pressure flanges. The hole spacing and bolt size are required to hold the required preload. Then edge distance Is 2 1/2 x the bolt hole diameter. I believe it's specified in shigleys mechanical engineering hand book But it needs vetted.

..171 hole is small. Consider what equipment can verify a hole of that size. Viable equipment. Veniar calipers. Sunnen gage. Is used foe measuring honed holes. Internal micrometer. Or go and no go gage pins. And more. I would recommend verify hole size. Then a go no go gage to verify vc...

I am late in the game, I read all post but I would have to reread ASME on what every one Is conveying. I had to scratch my head. Fellas this is a simple assembly , plate with brackets. I have to reread op post. What is the intent of the drawing. . If this is just bolt hole, the holes have to be...

you are incorrect about multilayer parts. if the holes are not coordinated. there will be interference. that's why on aircraft bodies several details of two or more are match drilled. . rookie mistake

I stated it wrong should be go size

Then it's covered

The gage pin should be oe allow minimum hole diameter. Re iterate gage should be held with or by the datums.

O OK, I recommendation on the gage the pin should be no go, the gage should restrain to the datums, verify acceptance to mmc. The hole should be verified independently. Go and no go

great questions, however I have a question as well, are the holes being match drilled. or are they being drilled indepently. and what is the size of diameter. you quoted screws so I assume small fasteners. reason when assembling 2 or more components it is important to keep them in line. either...

I have no useful info, not a composites guy

OP An other question and or suggestion. Is there a system to mitigate moment. Dampening, springs , higher elastic material mitigate vibration and moment?

Wdr If you came for an interview , and if I was the hiring manager, I would not hire you. Attitude is very important. Wanting to humble your self and want to learn Is an other hot tip. Your first post could be easily interpreted as a Derogatory comment. That's not how you ask very experience...

Also as mentioned earlier, what is the amount of cycles on all the equipment. Do bearings , gear box, and or the motor need maintenance? Or replace. Is there an analysis for constant rpm, and no moment. Causing the product to bounce. Does the belt need the correct tension and adjustment? Is the...