Recent content by starfarooq

As per RBI analysis of our Ammonia storage tank, the inspection interval is 15 years ( EFMA Criteria was used to calculate the inspection interval). Now we have read somewhere that by carrying Fracture Mechanics analysis, the inspection interval can be extended by 10 years. Does anyone know...

I can share some literature. Please send me your email

We are running a fertilizer complex consisting of Ammonia and Urea plants. Ammonia and CO2 gas are separately fed into Urea plant from Ammonia plant. The CO2 gas is compressed to 143 bar before entering into Urea reactor where it mixes with Ammonia to form Ammonium Carbamate solution. We are...

We are operating a Urea plant built on Stamicarbon technology. The High pressure synthesis loop (consisting of Reactor and stripper and HP Carbamate condensers) is made of Safurex material. We had inspected it with Stamicarbon experts in 2011 and they advised to keep the next inspection after 6...

can somebody tell about some company which provide the services of repairing such vessels?

we have a pressure vessel of which the bottom shell portion (cylindrical) severely corroded due to which there is a thickness loss of 8 mm (original thickness was 34 mm and now it is 26 mm). There is an option of replacing the bottom shell course by new one but it will take a lot of time and we...

ASME Section VISION Div.1

Does the code allow using tube sheet made from hot rolled plate instead of forged one?

We have a vertical U-tube bundle type heat exchanger installed at our ammonia plant (Waste Heat Boiler). It was manufactured in 1975 on Stoom Weezen code. Now the bundle has completed its service life and we want to replace it, while keeping the existing shell unchanged. Our technical...

Thank you very much for valuable inputs

I am searching for a machine which can do onsite machining of round flange faces as well as pass partition slots of heat exchangers. Are there any such machines available which can do both the jobs?

I sorted it out... Actually I was using improper search phase while googling. When I used the word "spot cooler" it gave a lot of results.

I have searched many websites but could not find the required result

I am searching for a trolley mounted portable air conditioner with hose for cool air (up to 60 ft long). This is required for quick entries into vessels which take several days when cooled with conventional air blowing. Is there some product available in the market?

I am searching for a trolley mounted air conditioner with cool air hose (up to 60 ft long). This is required for quick entries into vessels which take several days when cooled with conventional air blowing. Is there some product available in the market?