Geez my head has been spinning lately,
It is a flat root.
Luckily I have .1968" measuring wires, and like you said they needed some grinding to avoid hitting the root.
I measured 1.580" between pins.
The spline is brand new, never used, no wear at all.
I do not have the mating shaft nor do I...
Sorry, I forgot it is 18 tooth.
So base pitch does work on splines, good to know.
As far as referencing all the standards, I looked at the din and ansi stuff but the JIS stuff is not easy to read in japanese
I am reverse engineering an internal involute spline and I am unsure what it is, it doesn't seem to be a DIN or ANSI design.
I believe it may be JIS?? It is a Komatsu part. My first question is: Is there a way to quickly identify a spline dp/MOD and pressure angle similar to identifying a gear...
I am in the process of reverse engineering a spline.
this is what I know so far
module is 2, it has 24 teeth, it is the male part, the od measures 49.5MM, the minor dia is 45.25MM
This is where i get stumped, I don't know what din standard it is.
I am used to reverse engineering ansi splines, i...
It was installed recently.
I saved the old table and have access to it in the part and sheetmetal enviroments but I dont see a way to access it in the tabs or add it to the quick access toolbar.
I used to use the material table in the assembly enviroment to automatically drive information into the draft.
For example, I would call out a casting number as the material.
It now looks like I can no longer do this in ST4 unless I am missing something. Any else run into this?
I want the old ribbon bar back! this is totally ridiculous. the edge bar or whatever changes from part to draft to assembly, nothing is logical anymore. I hope they fix this. ST is the biggest Cluster %$#@# ever
Ok,
I dont like to rant on forums but ST is really starting to get on my nerves. I have always disliked the docking undocking feature of the edgebar or whatever it is these days. now its drivin me nuts! what is going on here, it blocks half my screen, and the only way to get rid of it is to...
dang! it is really annoying, I thought I could get rid of this. i was using an older version the other day and it was wonderfull, everything was so smooth going
sorry i double posted.
anyways, i have another issue that is very similar. when i am extruding something the cursor must be over the extrude menu or dialog box whatever it is now. if it is not over it solid edge will not recognize a typed distance.
this must be some setting that i cant seem...
I have a problem. When in draft mode, if i am adding a suffix or prefix, and the mouse cursor moves off of the dialog box for the suffix/prefix, solid edge then thinks you are overiding the dimension and whatever input is typed is now in the dimension overide
i have attached a screenshot
