Hello GHaulk;
I am missing something in your process description, I think.
An LPF instruction in RSLogix5000 is a "Low Pass Filter" instruction:
"The LPF instruction attenuates signals that occur above the configured cutoff frequency. This instruction is typically used to filter out high...
Hello oddmanout;
Sorry about your frustration, but...
If you can't find ANY answer on the web, and I guess the web is the greatest trove of dissiminated knowledge ever built... Maybe the original question is inadequate. Maybe that's the way it was written out in your manuals, but I can assure...
Hello, mumarzia;
I only saw your post today, ans I hoope this answer will still be usefull.
Siemens' Pascal-like language is called SCL, and you can find the SCL programming manual at this address...
Hello Fault40;
We did a project 2 years ago using TI555 PLCs and Siemens Sitrans flowmeters. On the DP side, we could configure the DP/PA link (IM157) as a Profibus-DP slave in ComProfibus; but we could not see the PA side . We needed to generate a PA profile ( in Simatic PDM) for every device...
Hello Sanderscj;
All Siemens S7-300 and 400 PLCs can be programmed either in Ladder or FBD, and you can easily look at the logic in either form as required. Step7-Basis is the programming software's name. The S7-200 can also do the same as per the most recent release of Step7-Microwin, v. 3.1...
