Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

WATER SOURCE

Status
Not open for further replies.

Ifakiz

Chemical
Jul 4, 2006
14
how do I determine whether the associate water in the crude is from the reservoir or there is a leakage somewhere along the tubing.
Anything to watch out for.mere physical analysis together with provable points would be appreciated.
 
Replies continue below

Recommended for you

Looking at the water make up in terms of the different minerals, Calcium, sodium, sulphates, carbonates, Chlorides, ect.. Compare concentration and ratio's between eac. Your base is a well from the same formation or historical from same well.

You should repost in the petroleum production for more input.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor