Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

View zoom in only one direction

Status
Not open for further replies.
onix

onix

Electrical
Nov 12, 2004
5
Dear Abaqus CAE users,

I am working with very thin semiconductor layers and would like to zoom my geometry view in the z-axis. Is there any way to do this in 6.8-1?

-onix
 
Status
Not open for further replies.

Similar threads

SinaPeugeot
  • Locked
  • Question
Bending-Only Shell Elements in Abaqus/Explicit
Replies
3
Views
410
SinaPeugeot
SinaPeugeot
R
Abaqus: transferring solution field from one instance to another between steps within same analysis.
Replies
2
Views
3K
Ron_ron
R
robertt3
  • Locked
  • Question
Plastic modeling only by Abaqus built-in property settings
Replies
8
Views
478
robertt3
robertt3
P
Information about Mapping Stress from one simulation result to another geometry ( which is a trimmed version of previous geometry)
Replies
2
Views
2K
FEA way
FEA way
Haozi_
  • Locked
  • Question
torch direction cannot parallel to a segment
Replies
4
Views
315
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom