Aug 9, 2006 #1 Cuyanausul Mechanical Aug 27, 2005 67 Hello Any one has experience on vacuum pipe test aproved by ASME code?
Aug 11, 2006 #2 codeeng Petroleum Feb 9, 2004 365 There is no Code requirement for vacuum testing, just a design method. Upvote 0 Downvote
Aug 11, 2006 #3 rhg Mechanical Nov 14, 2005 63 Only as a guide, see ASME VIII Div. 1 UG-99 If you need a leak test, see ASME V Regards rhg Upvote 0 Downvote
Aug 11, 2006 #4 JStephen Mechanical Aug 25, 2004 8,700 If you're actually pulling a vacuum in the pipe, check to make sure you won't collapse the pipe. Upvote 0 Downvote
Aug 12, 2006 Thread starter #5 Cuyanausul Mechanical Aug 27, 2005 67 Excelent, thank you, the problem I had was how to get rid of the water after the test. But I already solved it, I will reinject it in a geothermal well, using a cyclon so we won´t clog it. Upvote 0 Downvote
Excelent, thank you, the problem I had was how to get rid of the water after the test. But I already solved it, I will reinject it in a geothermal well, using a cyclon so we won´t clog it.
