meolo2002
Marine/Ocean
- Sep 24, 2009
- 37
I've also another problem..
i've to set a radial nodal force on an hald of a cylindre...
I've created a cylindrical reference sys on the center of the base of cylinder, R axis on 0° of the cylindre and T along pi.greco/2. the value of the field is
1 R
2 mth_sind(R)
3 Z
but the result is not along a radial vector and value is not depending on angle.
in addition, the value seems to change with Z
any ideas?
i've to set a radial nodal force on an hald of a cylindre...
I've created a cylindrical reference sys on the center of the base of cylinder, R axis on 0° of the cylindre and T along pi.greco/2. the value of the field is
1 R
2 mth_sind(R)
3 Z
but the result is not along a radial vector and value is not depending on angle.
in addition, the value seems to change with Z
any ideas?