Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

source for 6" square carbon fiber tube with 3/16" wall

Status
Not open for further replies.
grv15

grv15

Mechanical
Nov 7, 2003
1
Before I tie the shop up with a one time only special layup project, can anyone point me to a source for carbon fiber composite tubing near 6" square and 0.13 to .18 wall thickness. This will be used as the gantry beam in a CNC drill table. I will need a piece 74" long.
 
Status
Not open for further replies.

Similar threads

S
  • Locked
  • Question
Transverse Properties of Carbon Fiber
Replies
5
Views
3K
Compositepro
Compositepro
Cisnerjo
  • Locked
  • Question
Plaster Mandrels alternative materials for washout mandrels (fiber glass air ducts) 1
Replies
2
Views
789
Cisnerjo
Cisnerjo
Oluwakay
  • Locked
  • Question
HOW TO OBTAIN ORTHOTROPIC PARAMETERS FOR A FIBER REINFORCED COMPOSITE
Replies
2
Views
887
Oluwakay
Oluwakay
vinguy
  • Locked
  • Question
Compressed Air vs Nitrogen for Autoclave Cures
Replies
5
Views
2K
georgeverghese
georgeverghese
astro_boy
  • Locked
  • Question
Dissimilar Material between Carbon Steel Flange to Stainless Steel Strainer
Replies
2
Views
624
SWComposites
SWComposites

Part and Inventory Search

Sponsor

Back
Top Bottom