Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Rolls Royce Turbine Power Derate

Status
Not open for further replies.

Termodinamica

Mechanical
Mar 17, 2012
16
Does any one one a rule of thumb or method to derate the power on Roll Royce Gas Fired Power Turbines?

I have a RR 501KC7 that Id like to Derate under 128 ft of elevation and 90F. The manufactured rated Horsepower is 7200.

Any feedback will help.

Thank You .
 
Replies continue below

Recommended for you

Did you call your Rolls support team?

(By the way, be explicit about both the maximum and minimum actual air pressures and air temperatures! 128 foot "elevation" implies a ground level of 128 feet above sea level, right? But humidity, air temps, spray water (if any), and inlet filter design are going to be more important.)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor