themaniac
Aerospace
- Sep 8, 2003
- 16
Rigid Body Dynamics:
The situation is an aircraft performs a manouver which involves rotation about all 3 axis. The result of this manouver is that any point offset from the center of gravity (CoG) experiences an acceleration that is the combination of the linear accelerations of the CoG and a component due to the rotations about the CoG.
If the aircraft is defined using a standard right-hand coordinate system the equations can be located in any number of dynamics texts and is usually given by:
[a] = [a]CoG + [w] X ([w] X [r]) + [alpha]X[r]
[a]- Acceleration at offset point
[a]CoG - Acceleration at center of gravity
[w] - Angular velocity about center of gravity
[r] - Distance offset from center of gravity
[alpha] - Angular acceleration about center of gravity
X - Cross product
If however the aircraft was to be defined in a left-hand coordinate system would the above equation still apply.
Now, I know that this is the type of question we were all asked in the first year of our engineering studies but that was years ago and i'm just a little rusty on these things.
Any assistance would be appreciated.
The situation is an aircraft performs a manouver which involves rotation about all 3 axis. The result of this manouver is that any point offset from the center of gravity (CoG) experiences an acceleration that is the combination of the linear accelerations of the CoG and a component due to the rotations about the CoG.
If the aircraft is defined using a standard right-hand coordinate system the equations can be located in any number of dynamics texts and is usually given by:
[a] = [a]CoG + [w] X ([w] X [r]) + [alpha]X[r]
[a]- Acceleration at offset point
[a]CoG - Acceleration at center of gravity
[w] - Angular velocity about center of gravity
[r] - Distance offset from center of gravity
[alpha] - Angular acceleration about center of gravity
X - Cross product
If however the aircraft was to be defined in a left-hand coordinate system would the above equation still apply.
Now, I know that this is the type of question we were all asked in the first year of our engineering studies but that was years ago and i'm just a little rusty on these things.
Any assistance would be appreciated.