push lock plunger - vendor name

[agv]

I have used a hardware component in the past but cannot locate the vendor/mfr...I will try to describe it.

Metal stainless push lock plungers - this is a whole family of parts that consist of a stem with two or more retained ball bearings near the tip. The opposite end has a push button to allow balls to retract into the center diameter.
This way the part can be inserted into a thru hole and balls spring out to lock stem in place upon releasing button. Any ideas on this?

THX - Angelo

 

[Kenneth]

Take a look at

http://www.avibank.com/pindet.htm.

I think this is what you're looking for...

 

[agv]

THX, Ken.

You did pick out the right product..although the name does not ring a bell. This solves my problem...thanks again, Angelo

 

[Raulz1]

Before I retired we called them "Detent Pins" You might try

http://www.mcmastercarr.com

. Another sourse I know that has plenty of information is:

http://www.thomasregister.com.

Good luck. Raul