pipe thickness 3

[stonetech]

Is there a website or link I can get the steel pipe's thickness? for example, I found for the 114.3mm OD pipe, the thickness can be 4.8mm, can be 3.2mm. I ever searched one website:

http://www.traceapplications.com/charts/Pipe_Dimensions_and_Weights.htm

But it shows that there is no such thickness for 4" pipe, Why?

 

[JoeTank]

Look again... it's there!

Joe Tank

 

[metengr]

Here try this;

http://www.engineersedge.com/pipe_schedules.htm

 

[EdStainless]

The table of standard pipe diameter and wall thickness is an ANSI specification, B36.10 for steel and B36.19 for stainless.

These tables are attached to ASTM pipe specifications as an appendix. They list nominal outside diameter and nominal wall. You need to read specifications to find the outside diameter tolerance. The minimum wall for almost all pipe is 12.5% less than the nominal.

Ask any of your pipe distributors, they will send you a pipe table with their name on the top of it.

= = = = = = = = = = = = = = = = = = = =
Rust never sleeps
Neither should your protection

http://www.trent-tube.com/contact/Tech_Assist.cfm

 

[211272]

hi
you can find useful information in TC PINPING hand book its named the bible of piping