My pet peeves with SE v15!

[meiklephil]

When you have the main assembly open and go to edit a sub assembly why can’t you select a bunch of parts using a window to hide or what ever?
It works in the highest up assembly that you have open but not a sub assembly. To me this is very annoying!!
When you are in Draft it is very difficult to dimension a hole using hole callouts when the hole intersects with another hole.
Why can’t you create a hole in a part that has the edge of the hole tangent to the edge of a part or tangent to another hole.

There are many more these are just a few that are bugging me right now.

I feel better now. Venting helps.

 

[CorBlimeyLimey]

Why can’t you create a hole in a part that has the edge of the hole tangent to the edge of a part or tangent to another hole.

Because that would create a zero thickness feature, which is a no-no.

from (the City of) Barrie, Ontario.

Everyone has a photographic memory. Some just don't have film.

 

[meiklephil]

It is still annoying to have to create them .00001" apart (or some small distance).
In the real world this is sometimes needed.

 

[CorBlimeyLimey]

In the real world you would not easily be able to produce such a thin wall, nor would you want to. Normally a section of the wall would be removed to eliminate the razor edge.

from (the City of) Barrie, Ontario.

Everyone has a photographic memory. Some just don't have film.