redgen2002
Bioengineer
- Feb 14, 2002
- 4
I have to repair a martin 340 electrosurgery unit which is completely burned out.Normally i would send it over to the factory but in this special occassion i have to do it by myself.Is there anyone to have a past experience with this unit?I have the service manual but it is not helpfull.
If anyone can post a link for me to find a used one it will be most helpfull.
redgen2002 biomed@chania-cci.gr
Gr is for Greece
If anyone can post a link for me to find a used one it will be most helpfull.
redgen2002 biomed@chania-cci.gr
Gr is for Greece