Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Krauss Maffei probs.

Status
Not open for further replies.
Tom001

Tom001

Electrical
Feb 24, 2002
28
Does anyone know what the alarm "Swivelled running board" might be, the machine in question is a Krauss Maffei 27000 kN MC3, the only thing i can think of is barrel swing, but the option is not fitted to the press, the alarms description page is blank and this fault is driving me mad, PLEASE HELP!
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Do you have a walk area within the clamp unit ?
If so is the safety on this activating ?

Best of luck
 
Upvote 0 Downvote
Found it in the end! Apparently the press is old and had some form of drawbridge that drops when the gate opens, this had been removed and i found a short on the limitswitches which had been stuffed under the press
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top Bottom