Jul 17, 2002 #2 TVP Materials Apr 12, 2002 4,592 SAE J2329 covers low carbon sheet steels, with Grade 5 being IF, I believe. You can obtain this spec from SAE at http://www.sae.org . I will have to look further to see if there are any ASTM specs on IF steels. In the meantime, you may try the Auto-Steel Partnership website (http://www.a-sp.org) under the publications section-- lots of good info available, maybe some on IF (I usually recommend it for HSLA data, forming, etc.). Upvote 0 Downvote
SAE J2329 covers low carbon sheet steels, with Grade 5 being IF, I believe. You can obtain this spec from SAE at http://www.sae.org . I will have to look further to see if there are any ASTM specs on IF steels. In the meantime, you may try the Auto-Steel Partnership website (http://www.a-sp.org) under the publications section-- lots of good info available, maybe some on IF (I usually recommend it for HSLA data, forming, etc.).
Jul 31, 2002 #3 gdodd Automotive Jul 18, 2001 138 Although it does not mention IF steels specifically ASTM A 620 DQSK steel is usually supplied as an IF steel. Upvote 0 Downvote
Although it does not mention IF steels specifically ASTM A 620 DQSK steel is usually supplied as an IF steel.
