Help With Surveying Traversing

[MatthewMansfield]

Hi all

I have carried out a traverse of a carpark (my first traverse).

I have used a Trimble S8 Total Station to collect a round of angles between 3 points (STN1, STN2,STN2).

I have exported the data as a .dc 10.7 file and I am now importing the data into Trimble Business Center.

I have no idea what I am doing and was wondering if someone could look at the .dc file, adjust it to see if my traversing was any good.

I have been able to adjust the traverse in TBC & I have created a report but I don’t understand any of it.

Can anyone help?

 

[IRstuff]

Why can't you ask a Trimble applications engineer?

TTFN
faq731-376

Need help writing a question or understanding a reply? forum1529

Of course I can. I can do anything. I can do absolutely anything. I'm an expert!

 

[eea]

Maybe the file shows it (I don't have Trimble Business Center), but did you close the loop or was this collected as an open loop? The following links might help:

http://www.foresoft.com/Tutorials/CDS1E.htm

for a basic approach on calculating it by hand. A three point project would be a perfect one to compare results with.