Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help, need Choke Valve PLC Program

Thread starter yans70
Start date Nov 2, 2009

Status: Not open for further replies.

Nov 2, 2009

yans70

Electrical

any body knows and have programmed choke valve system. Operator to input a set point for desired choke valve position. Opening and closing choke will controlled with Solenoid ON/OFF. PLC programming with PID or similar to control opening and closing in smoothly.

Your help is very appreciated.

best regards,

yans