Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fire-tube is not a round connection

Status
Not open for further replies.
Badhat

Badhat

Mechanical
Feb 16, 2015
1
Hello all. New here.
I am working on a Heater Treater. The fire-tube is not a round connection. How do I do this and make it past the AI without any engineering notes explaining what I'm doing?
 
Status
Not open for further replies.

Similar threads

Amr Shams
  • Question
Advisory Warning on CS-2 Vacuum Chart Temperature Limit- Allowable compressive stress
Replies
0
Views
2K
Amr Shams
Amr Shams
C
  • Locked
  • Question
UG-34 ASMEVIII
Replies
3
Views
1K
Maslov
Maslov
Amr Shams
  • Locked
  • Question
Assistance for Multi-Chamber Vessel Design in COMPRESS
Replies
2
Views
3K
amillsmuel
A
Amr Shams
  • Locked
  • Question
Inquiry on Flange Neck Thickness Adjustment During Hydrotest
Replies
0
Views
1K
Amr Shams
Amr Shams
txcadman
  • Locked
  • Question
Compress and UG-45 on old vessels 1
Replies
1
Views
764
Cobra17
Cobra17

Part and Inventory Search

Sponsor

Back
Top Bottom