Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fire retardant potting material to be injected via Injection mold

Status
Not open for further replies.
dlee

dlee

Mechanical
May 24, 2001
1
Need advice on a fire retardant ( UL-94 V-0 ) Thermoset material to be injected via Injection molding machine into cavity with a PCBA inside.

Need minimum injection pressure and very good flow (excellent viscosity )

Any advice ?
 
Status
Not open for further replies.

Similar threads

clyde Verse
  • Locked
  • Question
Any way to produce a 100% same plastic lampshell without injection mold?
Replies
5
Views
1K
Pud
Pud
Buckshott00
  • Locked
  • Question
Process Setting for Improved Over-molding to prevent delamination In Molded Hytrel
Replies
0
Views
859
Buckshott00
Buckshott00
Thanh_fromVietnam
  • Locked
  • Question
Best plastic material/ grade for Plastic Pallet 1
Replies
2
Views
988
dgallup
dgallup
Myint Mo
  • Locked
  • Question
Injection Modling Machine 1
Replies
2
Views
812
Myint Mo
Myint Mo
titan0106
  • Locked
  • Question
unidentified liquid rsidual on the surface of connectors (PA66+30GF injection molded)
Replies
1
Views
811
Pud
Pud

Part and Inventory Search

Sponsor

Back
Top Bottom