Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fig UCS-66.2

Status
Not open for further replies.

david339933

Industrial
Jun 15, 2011
1,204
Folks,

Is tr in Fig UCS-66.2, the UG-27/UG-28 calculation (ta in UG-45) or final tUG-45? If it is UG-27/UG-28, can it be below UG-16 Minimum value?

Thanks.
 
Replies continue below

Recommended for you

tr (UCS-66.2) = t (UG-27/28).
ta (UG-45) = t (UG-27/28) + CA
Cheers,
gr2vessels
 
Thanks, Jurisdictional Authority was telling me otherwise, and started questioning my own sanity.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor