Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Erosional Velocity in Molybdenum and Tungsten/Copper-Infiltrated

Thread starter Transient1
Start date Nov 9, 2011

Status: Not open for further replies.

Nov 9, 2011

Transient1

Mechanical

Hi all,

I'm trying to find resources discussing maximum fluid velocity of water in Moly or Tungsten. The actual tungsten material is 90% Tungsten infiltrated with 10% copper. So I'm considering limiting the fluid flow to copper limits for that material. Any references on either and if not, how about a good paper on calculating that mysterious "c" in the erosional velocity formula?

Thanks.