Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Distance standard between KOD and Flare Stack 1

Status
Not open for further replies.

10815L

Chemical
Jul 24, 2011
178
Hi,
Except radiant heat and toxicity, are there any other standards for flare stack distance specifying between KOD and flare stack, please share your experience. This case is in desert area for oil company, no population around this field exists.
Thanks
10815L.
 
Replies continue below

Recommended for you

Just my own opinion, but I do not think there is a minimum distance requirement.
I have seen KO Drums located 200 to 300 feet away from the Stack, I have seen the KO Drum built into the bottom of the Stack and I have seen underground KO Drum Designs for locations close to the Stack. But I have never seen anything in writing dictating a minimum separation distance.

prognosis: Lead or Lag
 
I would suggest that the drum is located beyond the 4,7 kW/m2 zone (can remember the number in BTU/sq ft/hr or water ever US unit is used in API) - this would make service & inspection easier but i agree with pennpiper that there is no requirement here.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor