Diameter arrow settings in PMI

[cobaltred]

NX 9, I would like to know where I can set the arrow behavior from two arrows that are on the outside to the outside of a PMI diameter dim, to one arrow
on the outside of a diameter feature. I can change it one at a time by right clicking and edit but where is it located so that when I create the PMI dim
it does not need changed. I can change all perimeters in drafting preferences to just fine but there does not seem to be a toggle to switch from one or two arrows.
I looked in customer defaults as well. Maybe I am just missing something.

Thanks,Buddy.

 

[BEAEROHEAD]

I could not get rid of the second arrow head on the diameter dim,. Try using the hole dimension instead.

 

[jerry1423]

Is it possible that you could use the hole dimension instead of the diameter dimension ?

 

[JohnRBaker]

I would recommend that you use the Radial Dimension function with the 'Method' set to 'Hole Callout' and if you don't want something like the 'Thru' notation included, select the 'Settings -> Holes Callout' option and toggle OFF the 'Depth' item.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[BEAEROHEAD]

JohnRBaker: I think he just wants one arrow on the PMI dia dim? That would be the hole dimension function.