jhierho
Mechanical
- Feb 18, 2003
- 1
I need some help in designing a bi-directional clutch bearing.The chalange is to come up with a design which will be able to do the following:
1. act as a regular bearing with free rotation in clockwise and counterclock direction.
2. be able to run clockwise and lock counterclock wise. This can be done with a standard clutch bearing(needle bearing)
3. reverse the movement (run counterclockwise and lock clockwise)
4. lock completly.
If you know of any exsiting design please let me know.
1. act as a regular bearing with free rotation in clockwise and counterclock direction.
2. be able to run clockwise and lock counterclock wise. This can be done with a standard clutch bearing(needle bearing)
3. reverse the movement (run counterclockwise and lock clockwise)
4. lock completly.
If you know of any exsiting design please let me know.
