Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Design concept for the gears.

Status
Not open for further replies.
yshgao

yshgao

Automotive
Aug 6, 2009
16
Hi All,

if we design the motion device no matter gear to gear, or ball to plate, the surface hardness on one part should be harder than another one. Please tell why?
 
Status
Not open for further replies.

Similar threads

WendelTrento
  • Locked
  • Question
Material for manufacturing the extruder cylinder
Replies
0
Views
955
WendelTrento
WendelTrento
elinah34
  • Locked
  • Question
Item modular profile construction design - an advice is needed
Replies
4
Views
4K
elinah34
elinah34
Radius1
  • Question
Looking for specification for identifying pearlite in cast iron sample.
Replies
0
Views
1K
Radius1
Radius1
preetham_alluri
  • Locked
  • Question
Groove formed along the welding direction in FSP simulation in DEFORM software
Replies
0
Views
723
preetham_alluri
preetham_alluri
BSMEclassof2012
  • Question
Brine concentration for pumps made from ductile cast
Replies
1
Views
1K
EdStainless
EdStainless

Part and Inventory Search

Sponsor

Back
Top Bottom