Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Deposits of FeC03 in positive displacement gas compressor piston 1

Status
Not open for further replies.

LucianoCalloni

Chemical
Sep 8, 2009
5
We found deposits of FeCO3 in the piston of a natural gas compressor. The gas directly from the well pass through an inlet separator before entering the compressor. We also found organic material that covered the FeCO3 deposit. One thing to mention is that molar % of CO2 is almost 0.
I would like to know what is the cause of this deposit. Any ideas???
Thanks.
 
Replies continue below

Recommended for you

The system pressure of the inlet separator is around 460- 510 psi (32-36) kg/cm2.
The gas is compressed at 1060 psi (75 kg/cm2).
 
so, there is no vacuum farther upstream? How about a CO2 treat way upstream? Other than that, the FeCO3 has to be coming from the formation.
 
No, there are no treatments for CO2 removal, and the gas directly from the well pass through a trifasic separator, and enters the compressor.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor