Jun 5, 2003 #1 jakeh76 Structural Jan 13, 2003 20 Is there a standard for the minimum cover over a compsite beam stud? Any suggestions would be appreciated. Thanks.
Is there a standard for the minimum cover over a compsite beam stud? Any suggestions would be appreciated. Thanks.
Jun 5, 2003 #2 VoyageofDiscovery Structural Apr 7, 2002 617 Hi jakeh76, In bridge decks, typically one wants the underside of the stud head to the top of the bottom transverse rebar to be greater than one inch. Regards VOD Upvote 0 Downvote
Hi jakeh76, In bridge decks, typically one wants the underside of the stud head to the top of the bottom transverse rebar to be greater than one inch. Regards VOD
