bystar Problem

[ismail wajdi]

hello,
I have a bystar 3015 laser cutting machine, when i run a pc-pannel, the MMC program displays : """Could not open cnc interface. The specified file can not be found. repeat"""
someone can help me

thank you

 

[krugtech]

don't know if you fixed this. If you have a newer panel PC with the fins on back, the fiber interface card is known to fail. I can repair these on an exchange basis. I change th edesign a little and they hold up much better. If you have the older panel PC with the floppy/zip drive in front, it's most likely the fiber cable or the cpu card in the rack.

Chris

706-627-7854

Chris Krug

http://krugtech.com/

Maximum Up-time, Minimum BS