Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASTM A53 Type E Grade B or API5L Grade 8

Status
Not open for further replies.
qaengineer1969

qaengineer1969

Mechanical
Dec 1, 2010
8
If I was fabricating carbon steel pipe spools what material would be best to use either ASTM A53-Type E Grade B or APISL Grade 8.
What is the advantages and disadvantages between the two.
 
Status
Not open for further replies.

Similar threads

Andrewstructure
  • Locked
  • Question
Cast Steel - Johnstown Works Grade SX, .10-.20 C
Replies
0
Views
658
Andrewstructure
Andrewstructure
Mike Mike
  • Locked
  • Question
Am I supposed to specify mortar type M, S, N, or O? 1
Replies
9
Views
2K
phamENG
phamENG
Wickerfields
  • Locked
  • Question
ASTM F1960, Sub Reference D2122-98
Replies
2
Views
960
SWComposites
SWComposites
G
  • Locked
When I looked at the specification ASTM C33 I did not find the specification limits for the 1/2-inch sieve as mentioned in the
Replies
0
Views
1K
GHADA ALQARESH
G
Muhammad Ijaz
  • Locked
  • Question
Availability of 3mm thick As rolled ASTM A516 70 plate normalized and impact tested
Replies
0
Views
933
Muhammad Ijaz
Muhammad Ijaz

Part and Inventory Search

Sponsor

Back
Top Bottom